Text only
|
Text with Images
Robots in Architecture Forum
KUKA|prc - parametric robot control for Grasshopper => Tutorials => Topic started by: Johannes @ Robots in Architecture on April 29, 2016, 04:05:28 PM
Title:
Example: Extrusion for 3D Printing
Post by:
Johannes @ Robots in Architecture
on
April 29, 2016, 04:05:28 PM
Extrusion for 3D Printing
Requirements: Rhinoceros 5, Grasshopper 0.9.0076, KUKA|prc V2
Using Grasshopper to define robotic 3D-printing toolpaths, allowing us to quickly fine-tune parameters.
Text only
|
Text with Images