Text only
|
Text with Images
Robots in Architecture Forum
KUKA|prc - parametric robot control for Grasshopper => Tutorials => Topic started by: Johannes @ Robots in Architecture on April 29, 2016, 04:01:53 PM
Title:
Example: Simple Drawing/Engraving
Post by:
Johannes @ Robots in Architecture
on
April 29, 2016, 04:01:53 PM
Simple Drawing/Engraving
Requirements: Rhinoceros 5, Grasshopper 0.9.0076, KUKA|prc V2
A simple example on how to have the tool follow a toolpath, e.g. for drawing or engraving.
Text only
|
Text with Images