Print Page - KUKA prc settings (Start and end Position)

Title: KUKA prc settings (Start and end Position)
Post by: OXIDO on January 14, 2025, 01:18:53 PM

Hello,
I am using CoreHL with my program and must set a Start and end position. I have shared a photo of what I thought might work, but unfortunately, it's not working. I hope someone can point out my mistake.
(https://i.postimg.cc/LXhpV3Nh/Screenshot-2025-01-14-at-17-46-33.png)

Regards,
Ojas

Title: Re: KUKA prc settings (Start and end Position)
Post by: Johannes @ Robots in Architecture on January 14, 2025, 03:03:58 PM

Hello,

The start and end positions need to be axis positions, as in the user interface!

Best,
Johannes

Robots in Architecture Forum

KUKA|prc - parametric robot control for Grasshopper => Support => Topic started by: OXIDO on January 14, 2025, 01:18:53 PM