Hi everyone How can a wrap like the one in the image below be made? Has anyone tried it before?How to do that with KUKA PRC?
https://www.youtube.com/watch?v=L7UDbcJFbDc&list=PLXpx0cHFLYjq-A7t4yPzxxuWRy9HcQI99&index=3 (https://www.youtube.com/watch?v=L7UDbcJFbDc&list=PLXpx0cHFLYjq-A7t4yPzxxuWRy9HcQI99&index=3)
Geometrically, doing something like this is definitely possible, however you need to take into consideration that a lot of work went into a program like the one you linked to. So I would strongly recommend not to look for "universal solutions" that do everything, but to pick a challenge relating to your project and start with that.
I have put together an example using an external tool, which should be useful for winding. The example does not show a proper winding toolpath, though.
Best,
Johannes
...I now saw how they do it at 11:15 in the video - then you would need an external axis to rotate your part.
Best,
Johannes