Text only
|
Text with Images
Robots in Architecture Forum
KUKA|prc - parametric robot control for Grasshopper => Tutorials => Topic started by: Johannes @ Robots in Architecture on April 29, 2016, 04:03:49 PM
Title:
Example: 3D-Scan Drilling
Post by:
Johannes @ Robots in Architecture
on
April 29, 2016, 04:03:49 PM
3D-Scan Drilling
Requirements: Rhinoceros 5, Grasshopper 0.9.0076, KUKA|prc V2
The geometry of a 3D-scan is constrained to the robot's toolpaths to perform a drilling operation that is always normal to the scanned geometry.
Text only
|
Text with Images