Text only
|
Text with Images
Robots in Architecture Forum
KUKA|prc - parametric robot control for Grasshopper => Tutorials => Topic started by: Johannes @ Robots in Architecture on April 29, 2016, 04:16:16 PM
Title:
Example: Tool Change
Post by:
Johannes @ Robots in Architecture
on
April 29, 2016, 04:16:16 PM
Tool Change
Requirements: Rhinoceros 5, Grasshopper 0.9.0076, KUKA|prc V2
Implementing a tool change operation. In this example, a custom tool with two TCPs is used.
Text only
|
Text with Images