Author Topic: Spindle to DeviceNet Connection Guide  (Read 1789 times)

d2b Design

  • Robots in Architecture Members
  • Forum User
  • *
  • Posts: 6
    • View Profile
Spindle to DeviceNet Connection Guide
« on: July 24, 2019, 11:53:41 PM »
Hi all,

We're preparing to connect a 9kW spindle to our KUKA KR250 for wood milling and we're wondering if anyone is using DeviceNet to control parameters on a VFD or initiate a tool change, etc. I saw a previous post about configuring Beckhoff modules through Work Visual, but nothing on DeviceNet.

In general I'd like to create a guide for setting up a spindle for milling with the KUKA - it seems like something everyone is interested in!

- Dante

Johannes @ Robots in Architecture

  • Lead Developer
  • Administrator
  • Forum User
  • *****
  • Posts: 1093
    • View Profile
    • Robots in Architecture
Re: Spindle to DeviceNet Connection Guide
« Reply #1 on: July 25, 2019, 11:44:52 AM »
Hello Dante,

A quick search gave me that PDF manual as a result:
Unfortunately I'm by now quite good with EtherCAT and a ProfiNet, but don't have much experience with DeviceNet... So a guide would be very welcome!