setup MXA module in PRC _ Query

Started by vitene4776, November 10, 2023, 12:06:38 PM

Previous topic - Next topic


hi,everyone, i'm having trouble with the setup.
The current situation is that i've installed MAX(3.0x,My KSS is 8.5) on the robot and the UPD_Server Example has been successfully run,but it didn't work in PRC.
I've disabled the firewall on the PC. I'm not sure if there is a problem with the MXA settings, can someone help me, do i need to set up Physical IP on Mxa Module,is that my PC IP address or somethingelse, and where can i get the Robot ID?

Johannes @ Robots in Architecture


You need to take care that the mxA version in KUKA|prc matches with your installed KUKA|prc version. You also need to set the (KLI) IP address of the robot. I believe the default is (which is used in OfficeLite), the KUKA standard is Just use the same IP as in the UDP_Server_Example.

We often make specific builds for our members. As you are not registered as a member in the forum, could you please send me an email ( with your exact mxA version as, ideally from a domain that verifies your affiliation/membership?