Floppy ? / Network Share

Started by Xylotica, September 18, 2015, 12:37:13 PM

Previous topic - Next topic

singline

I have a tutorial detailing the steps required to network to a KR C4, I'm sure the steps are similar for the C2:
https://youtu.be/qu1jxcGFuNI

the network credentials you're probably looking for are the kuka side ones such as the ones easily found online when searching..

• WinXPe 1.0 User name = Administrator Password = KUKA
• WinXPe 1.1 (VKSS 5.4) User name = Administrator Password = KUKA
• WinXPe 2.0 (KSS 5.2, KSS 5.3, KSS 5.4, KSS 5.5, KSS 5.6 and KSS 7.0) User name = Administrator Password = KUKA
• WinXPe 2.2 (from KSS 5.2.19 Build85 HF03, KSS 5.5 and KSS 5.6) User name = Administrator Password = kukarobxpe2
• WinXpe 3.0 (KSS 8.0, KSS 8.1, KSS 8.2) User name = Administrator Password = 68kuka1secpw59
• WES7 4.0 (KSS 8.3) User name = KukaUser Password = 68kuka1secpw59

Johannes @ Robots in Architecture

Hello,

Maybe that's connected to SMB1, an older file sharing protocol. See here how to enable it on Windows 10:
https://infusionsoftware.zendesk.com/hc/en-us/articles/360000193095-SMB1-on-Windows-10-Build-1803

Best,
Johannes

singline

My next guess also, thanks to my recent cwrite trouble.. ;)

robotmey

I tried all Usernames and Passwords but still network credential doesn't allow to acess to shared folder because of "wrong username or password" :(

any idea?

singline

I'm not well versed in earlier KSS, but this thread on robot-forum has plenty of tips on attempting to network with a KR C:
https://www.robot-forum.com/robotforum/thread/32603-how-to-use-khash-exe/?pageNo=1

And I assume you've disabled firewall and defender on the laptop?

robotmey

I have read almost all posts but unfortunately with no result. username and password must be 'administrator' and 'kuka',because it needs these username and password each time I stop VxWorks and I want to go to the windows. 
defender is enabled but firewall is disabled. are they related to network credential?

Johannes @ Robots in Architecture

Hello,

Why would you stop VXWorks for a file share?
Regarding the login, you can just create a new user account for that as well.

Best,
Johannes