Example: Extrusion for 3D Printing

Started by Johannes @ Robots in Architecture, April 29, 2016, 04:05:28 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Johannes @ Robots in Architecture

April 29, 2016, 04:05:28 PM
Extrusion for 3D Printing
Requirements: Rhinoceros 5, Grasshopper 0.9.0076, KUKA|prc V2

Using Grasshopper to define robotic 3D-printing toolpaths, allowing us to quickly fine-tune parameters.
Print
Go Up Pages1
User actions